These look decent and are fairly close to the same gold as my seymour duncan jb/jazz pups. Giving these 4 stars because there is a slight gap on the low e side of the neck pup, but really solid for the price.
Got this for an epi LP. I dont know if I got lucky or if Guyker is just this good, but it was perfectly intonated for my guitar out of the box. Like within a cent. Mind blown. Unexpected bonus - this is much more comfortable to play than the normal triangles jabbing into your palm.
The only negative is the little hex screw placement. On the high e side, it lines up with the tone knob and is annoying to adjust because you have to use the short side of the allen wrench.
CHECK THE POST SIZE! My dumba$$ got the wrong size. Drilled it out to 6mm annnnnd...it fit! Don't do that. Measure twice, buy the right one lol.
I had allot of problems with intonation my uni vox phase 4. I almost wanted to sell the guitar. so when i installed the Gyker Bridge and directly it was almost perfect intonation i was blown away!!!!!!!!! absolute brilliant hardware !!!!!
Though it took a hot minute to arrive, the engraved metal death moth guard is one-of-a-kind beautiful. The edges need a little buffing as they are sharp, but the detail is worth that effort!
I learned about the GM85 from a YouTube video. I thought it was an intriguing product so I got one for a mod project I was working on. I was totally blown away by how easy it was to install! It took longer to put new strings on than it did to install the trem! I’m completely happy with this product!
This works well but takes some care and patience to install. I installed it on a hollow body Les Paul shaped guitar with a Bigsby and a roller bridge. I had to widen the mounting point on the neck to get this nut to fit. The included brass riser makes the nut sit too high so I replaced it with a much thinner bit of brass that I cut using the included one as a template. Once installed it works well and has a bit more zing than bone or plastic nuts on the open strings. Great item for the price and it means my Bigsby-equipped guitar should hold tune a bit better. The extra top end is also a bonus.
They are beautiful!! They have a good torque
Love this product. They look great on my Spector bass
Since I prefer to equip some guitar parts which cannot be found on Japanese market, indeed the Guyker product is what I was looking for.
The Guyker products are trustworthy quality, reasonable price, and combines with wonderful design.
Before placing an order from this website directly, little bit I was concerned because there is no distributor here in Japan, but my mind has been changed when receiving the products.
I would introduce the Guyker to my music friends!!
Купил тремоло систему на 7 Струнный свой будущий проект, я думал будет хуже чем на картинке, но нет, пришёл, тяжёлый качественный экземпляр! Если вы ищете Gotoh 510 - FE7, остановитесь, посмотрите на эту машинку.
Buttons are made in plastics insted metal, so they feel cheap quality. The hole for the tuner pin is to big, for thar reason you have to use the shimes and they were difficult to install. They are to expensive for the quality. You must sell the same but in metal, paying the same price.
This tuneable tailpiece takes all of the work off of the tuning keys . Makes tuning simple and hold stead fast .
I've put the Guykur Roller Bridge for Jazzmasters on 3 of my guitars (2 Jazzmasters and 1 Jaguar). Super easy install — they fit really nicely into the existing thimble slots. I was astonished with the intonation out of the box — amazing stuff. Only a couple of small height and saddle adjustments needed. HIGHLY recommended — the bridge works so well with the tremolo system. Combined with the Guykur locking tuners this is such a great / easy upgrade.
I've now put GUYKER locking tuners on 3 Jazzmasters and 1 Jaguar I own. Really easy install and they work great. I've noticed a nice change in terms of tuning stability — really pleased with these. Highly recommended.
I built my Strat DIY. I didn't like the parts that came with the combo and they never worked. After some reading, I found that changing the tremolo could solve this problem. It did, and I'm very happy with the change. The product feels premium. Shipping to Australia didn't take long, and everything arrived as ordered, at a very reasonable price.
I rebuilt a budget p-bass and upgraded the tuners and bridge. These open gear tuners are smooth, fit perfectly and stay in tune. The chrome finish is good quality too. I liked them so much that I'm rebuilding another one with the same mods.
very impressed with the quality of the bridge and tuners.This is my second order.The packaging,shipping time and quality are excellent.
Good product, looks beautiful on my precision bass
I put these knobs on my PRS Custom 24 Vintage Sunburst. The lampshade style along with the white bird inlay matches the guitar perfectly. These are well made quality knobs with set screw
The tuners on my Epiphone SG Special (freebie from a friend) were total garbage. I tried some Kluson tuners, since those were the recommended tuners for upgrading an SG guitar. As soon as I put those on, I KNEW I wasn't going to like them. As soon as I could, I returned those and picked up a set of these 1:21 gear ratio locking tuners feom Guyker. Although I had to have them installed by a luthier (the pilot holes didn't line up, and the shaft hole had to be reamed), I could NOT be happier with the outcome!! I've never used locking tuners before, and I was even more happy that my 1:21 ratio tuners came with the locking option. These feel great, do their job, and I don't have a coiled mess on my headstock.
Awesome product!!!
If I had the money, I would update all of my guitars with Guyker hardware!!!
I'll be giving them a spin on June 21st at the Kingdom Come Festival in Indiana when ChipSeal hits the stage!!
I'm very happy with the new knobs. Thanks Guyker
Great quality
Looks cool on my PRS Hollowbody 11 SE
These tuners have a smooth action and finer 26:1 ratio for precise tuning. Installation on a Fender 18mm headstock requires a 15 to 18mm nylon step bushing that can be found on Amazon.
